ttf1298

Triangle Hanging Basket
The triangle hanging basket is mainly composed of main tether, hanging adjustment system, walking system and template system. The main tether is the main force-bearing component of the hanging basket and consists of two triangular trusses. The main tether is the main force-bearing component of the hanging basket and consists of two triangular trusses. The walking system is the front and rear displacement device of the hanging basket, and includes inner and outer sliding beams and walking track. The template system is composed of bottom mold, inner and outer mold, end mold, etc. The bottom mold is an integral steel mold that is fixed to the front and rear lower beams by a longitudinal beam.
The installation sequence of the hanging basket is as follows: laying and adjustment of walking track → pre-spinning triangle truss → lifting triangle truss and intermediate linkage system → front upper beam lifting → inner and outer sliding beam lifting→front upper beam, rear upper beam lifting → bottom mold and longitudinal beam lifting → side mold forward → limit longitudinal beam installation → elevation adjust, bottom steel bar binding → move the inner mold forward, reinforcement → hanging basket installation completed.
When installing the hanging basket, please pay attention to following points: when pre-slicing the triangular tether, since the main one is connected together by gusset plate and rod, the hole’s position is required to be accurate, and the assembling site should be flat. When installing the walking track, the bottom shall be pre-leveled with dry mortar on the plane surface of the beam, and the height difference between left and right sides of the two tracks shall not exceed 1 mm to prevent overturning produced by uneven force during walking. When moving the inner and outer molds, 10t reverse chain can be used to maintain the left and right to be symmetrical, so that the tether can be under even stress.Cast-in-place Beam Formwork factory
website:http://www.hy-qlmb.com/cast-in-place-beam-formwork/


Mapas para tu GPS Garmin
siempre Actualizados!



Mapas-GPS.com Tel. 1-786-220-4065 Sobre Nosotros